Measure. Stabilize. Place precisely.
Pendulum Damping with Measurement Feedback for Bridge and Rotary Cranes
Our Pendulum Damping system measures the load’s pendulum angle in real time and automatically compensates for oscillations, even with particularly heavy loads. A camera or lidar completes the control loop. The camera also allows the system to detect diagonal tension.
A swinging load costs time and compromises safety
After every acceleration and braking maneuver, the load continues to swing. An uneven pull when it hits the stop causes it to move even more.
So you drive more slowly, wait until the load has settled, or countersteer manually. That requires a lot of experience and is tiring, shift after shift.




It’s not just about the oscillating load
Swinging out every second
missing in the work cycle
with every lift, on every shift, on every crane.
And any swinging load poses a risk to people and property in the vicinity.
Limitations of Common Solutions
Experience, patience, or computational Pendulum Damping in the drive system can help counteract load oscillations. This approach works, but it has its limitations.
Manual countersteering
Experienced crane operators take the load. This takes a lot of practice and is tiring.
Wait and drive slowly
The load comes to rest, but the cycle time increases.
Computational Damping
It estimates the oscillation based on the rope length and the motion of the ride, but does not measure the actual deflection of the load.
Loads that are already swinging
Calculational methods assume a static load and do not account for diagonal tension.
Your crane with our Pendulum Damping system

Measured instead of
estimated
A camera or a lidar continuously measures the deflection of the load.
Our control system compensates for the swaying of the crane via the crane control system before it disrupts the operation.
Step 1
Camera or Lidar
An industrial camera or a 3D lidar measures the load’s swing angle in real time.
Step 2
Cranium Pendulum Damping
The controller on the industrial PC calculates the correction for all axes, taking into account the load and the crane.
Step 3
Crane PLC
The PLC implements the correction via the drives; the load remains stable.

Interested in Pendulum Damping for your crane?
Find out how we can help.
Our Pendulum Damping in Everyday Operations
Shorter playing times
No need to wait until the load comes to rest: The oscillation is already stabilized while the vehicle is in motion.
Precise Placement
A stationary load can be positioned precisely and set down safely.
Crane Operators Relieved of Their Duties
The control system handles the load. This reduces the workload and the time required for training.
Outdoors, too
The camera and lidar are suitable for outdoor use. The lidar is IP68 and IP69K rated and designed to withstand rain and snow.
Access without sensors
Without a measurement sensor, the Pendulum Damping operates in open-loop control. A camera or Lidar can be added at any time.
Guided Commissioning
A pendulum test during startup calibrates the control system for your crane.
In Service at RheinCargo
Our technology is put to the test every day by Europe’s largest logistics and infrastructure companies. We don’t just deliver systems—we deliver measurable results.
RheinCargo, the operator of the Rhine ports in Cologne, Neuss, and Düsseldorf, uses Cranium’s Pendulum Damping system on its Rotary Cranes.
It is also suitable for STS Cranes, Intermodal Cranes, and Industrial Cranes.
Request a quote for our Pendulum Damping system for your crane
Bring calm to every load with closed-loop Pendulum Damping.

Martin Kirst
Geschäftsführer

Richard Herrmann
Prokurist

Uwe Ochs
Vertrieb